Troubleshooting Guide ********************* Overview ======== The **Trellis Troubleshooting Tools (T3)** is an ONOS application intended to **help you troubleshoot traffic-related problems** in your network by **tracing installed flows and groups**. T3 works both on simulated OVS-based topologies but also on real HW, basing it's internal decisions on the driver assigned to the device. T3 also currently supports dual links between leaf and spine and properly handles the difference between deferred and immediate rules. Dual Homed hosts are also supported in T3. To activate this tool on your ONOS environment, you need to run: .. code-block:: console onos> app activate t3 T3 supports tracing of following packet types: - L2 Unicast - L2 Broadcast - L3 Unicast (both IPv4 and IPv6) - L3 Multicast (both IPv4 and IPv6) - LLDP and BDDP - ARP - DHCP t3-troubleshoot =============== As of right now the tools provides a CLI command (troubleshoot). As arguments to the CLI command you have to pass arguments describing the packet you want to trace through the network. t3-troubleshoot Help -------------------- .. code-block:: console onos> t3-troubleshoot --help DESCRIPTION onos:troubleshoot troubleshoots flows and groups between source and destination SYNTAX onos:troubleshoot [options] OPTIONS -sm, --srcMac Source MAC -j, --json Output JSON --help Display this help message -v, --verbose Outputs complete path -ipp, --ipProto IP Proto -s, --srcIp Source IP -dm, --dstMac Destination MAC -ml, --mplsLabel Mpls label of incoming packet -vv, --veryverbose Outputs flows and groups for every device -udps, --udpSrc UDP Source -mb, --mplsBos MPLS BOS -et, --ethType ETH Type (defaults to ipv4) -sp, --srcPort Source Port -dtp, --dstTcpPort destination TCP Port -udpd, --udpDst UDP Destination -stp, --srcTcpPort Source TCP Port -d, --dstIp Destination IP -vid, --vlanId Vlan of incoming packet (defaults to None) Default Verbosity Level ----------------------- Let's look at an example. .. code-block:: console onos> t3-troubleshoot -s 10.0.2.1 -sp of:0000000000000204/3 -sm 00:AA:00:00:00:01 -et IPV4 -d 10.0.3.1 -dm 00:00:00:00:02:04 -vid None with this command we are asking the t3 tool to trace a packet with - Source IP of ``10.0.2.1/32`` - Input port ``of:0000000000000204/3`` - Source MAC ``00:AA:00:00:00:01`` - ethType ``IPv4`` - Source TCP Port ``12345`` - Destination IP ``10.0.3.1/32`` - Destination MAC ``00:AA:00:00:00:01`` - Destination TCP Port ``80`` and - VLAN ID ``None`` This command has a verbosity level of 0 and will output just the paths that the packet might take inside the network. In the example deployment taken from trellis.py [#trellis.py]_, the output will be: .. code-block:: console Tracing packet: [IN_PORT:3, ETH_DST:00:00:00:00:02:04, ETH_SRC:00:AA:00:00:00:01, ETH_TYPE:ipv4, VLAN_VID:None, IPV4_SRC:10.0.2.1/32, IPV4_DST:10.0.3.1/32, TCP_SRC:12345, TCP_DST:80, MPLS_BOS:true] Paths [of:0000000000000204/3, of:0000000000000204/2, of:0000000000000227/1, of:0000000000000227/2, of:0000000000000205/2, of:0000000000000205/3] [of:0000000000000204/3, of:0000000000000204/1, of:0000000000000226/1, of:0000000000000226/2, of:0000000000000205/1, of:0000000000000205/3] Result: Reached required destination Host Reached required destination Host Middle Verbosity Level ---------------------- There are also two other verbosity levels. .. code-block:: console onos> t3-troubleshoot -v -s 10.0.2.1 -sp of:0000000000000204/3 -sm 00:AA:00:00:00:01 -et IPV4 -d 10.0.3.1 -dm 00:00:00:00:02:04 -vid None prints flows selectors and groupId that are met along the path .. code-block:: console Tracing packet: [IN_PORT:3, ETH_DST:00:00:00:00:02:04, ETH_SRC:00:AA:00:00:00:01, ETH_TYPE:ipv4, VLAN_VID:None, IPV4_SRC:10.0.2.1/32, IPV4_DST:10.0.3.1/32, TCP_SRC:12345, TCP_DST:80, MPLS_BOS:true] Path [of:0000000000000204/3, of:0000000000000204/2, of:0000000000000227/1, of:0000000000000227/2, of:0000000000000205/2, of:0000000000000205/3] Device of:0000000000000204 Input from of:0000000000000204/3 Flows flowId=a20000bd57cb49, selector=[] flowId=900000d4173ff7, selector=[IN_PORT:3, VLAN_VID:None] flowId=9000004b3d1965, selector=[IN_PORT:3, ETH_DST:00:00:00:00:02:04, ETH_TYPE:ipv4, VLAN_VID:20] flowId=900000499769f5, selector=[ETH_TYPE:ipv4, IPV4_DST:10.0.3.0/24] flowId=a2000038b487e7, selector=[] Groups groupId=GroupId{id=0x70000010} groupId=GroupId{id=0x9200000d} groupId=GroupId{id=0x9000000c} groupId=GroupId{id=0xffe0002} groupId=GroupId{id=0x9200000f} groupId=GroupId{id=0x9000000e} groupId=GroupId{id=0xffe0001} Output through of:0000000000000204/2 Device of:0000000000000227 Input from of:0000000000000227/1 Flows flowId=a200005577bcd6, selector=[] flowId=900000498457b2, selector=[IN_PORT:1, VLAN_VID:None] flowId=900000f87746c9, selector=[IN_PORT:1, ETH_DST:00:00:00:00:02:27, ETH_TYPE:mpls_unicast, VLAN_VID:4094] flowId=a200005bfd6ed7, selector=[] flowId=9000009f3d554f, selector=[ETH_TYPE:mpls_unicast, MPLS_LABEL:205, MPLS_BOS:true] flowId=a20000e601fc35, selector=[] Groups groupId=GroupId{id=0x70000017} groupId=GroupId{id=0x20000016} groupId=GroupId{id=0xffe0002} Output through of:0000000000000227/2 Device of:0000000000000205 Input from of:0000000000000205/2 Flows flowId=a200008d542817, selector=[] flowId=900000be3179a0, selector=[IN_PORT:1, VLAN_VID:None] flowId=900000766be164, selector=[IN_PORT:1, ETH_DST:00:00:00:00:02:05, ETH_TYPE:ipv4, VLAN_VID:4094] flowId=900000ec1d5779, selector=[ETH_TYPE:ipv4, IPV4_DST:10.0.3.1/32] flowId=a2000042d8e6b5, selector=[] Groups groupId=GroupId{id=0x2000002a} groupId=GroupId{id=0x1e0003} groupId=GroupId{id=0x2000002a} groupId=GroupId{id=0x1e0003} Output through of:0000000000000205/3 Path [of:0000000000000204/3, of:0000000000000204/1, of:0000000000000226/1, of:0000000000000226/2, of:0000000000000205/1, of:0000000000000205/3] Device of:0000000000000204 Input from of:0000000000000204/3 Flows flowId=a20000bd57cb49, selector=[] flowId=900000d4173ff7, selector=[IN_PORT:3, VLAN_VID:None] flowId=9000004b3d1965, selector=[IN_PORT:3, ETH_DST:00:00:00:00:02:04, ETH_TYPE:ipv4, VLAN_VID:20] flowId=900000499769f5, selector=[ETH_TYPE:ipv4, IPV4_DST:10.0.3.0/24] flowId=a2000038b487e7, selector=[] Groups groupId=GroupId{id=0x70000010} groupId=GroupId{id=0x9200000d} groupId=GroupId{id=0x9000000c} groupId=GroupId{id=0xffe0002} groupId=GroupId{id=0x9200000f} groupId=GroupId{id=0x9000000e} groupId=GroupId{id=0xffe0001} Output through of:0000000000000204/1 Device of:0000000000000226 Input from of:0000000000000226/1 Flows flowId=a20000e9b27d24, selector=[] flowId=9000004bd76105, selector=[IN_PORT:1, VLAN_VID:None] flowId=90000069f274d1, selector=[IN_PORT:1, ETH_DST:00:00:00:00:02:26, ETH_TYPE:mpls_unicast, VLAN_VID:4094] flowId=a200000ec7529e, selector=[] flowId=90000050f9a350, selector=[ETH_TYPE:mpls_unicast, MPLS_LABEL:205, MPLS_BOS:true] flowId=a20000b15cada6, selector=[] Groups groupId=GroupId{id=0x7000000b} groupId=GroupId{id=0x20000009} groupId=GroupId{id=0xffe0002} Output through of:0000000000000226/2 Device of:0000000000000205 Input from of:0000000000000205/1 Flows flowId=a200008d542817, selector=[] flowId=900000be3179a0, selector=[IN_PORT:1, VLAN_VID:None] flowId=900000766be164, selector=[IN_PORT:1, ETH_DST:00:00:00:00:02:05, ETH_TYPE:ipv4, VLAN_VID:4094] flowId=900000ec1d5779, selector=[ETH_TYPE:ipv4, IPV4_DST:10.0.3.1/32] flowId=a2000042d8e6b5, selector=[] Groups groupId=GroupId{id=0x2000002a} groupId=GroupId{id=0x1e0003} groupId=GroupId{id=0x2000002a} groupId=GroupId{id=0x1e0003} Output through of:0000000000000205/3 Result: Reached required destination Host Reached required destination Host High Verbosity Level -------------------- The most verbose output you can get is .. code-block:: console onos> t3-troubleshoot -vv -s 10.0.2.1 -sp of:0000000000000204/3 -sm 00:AA:00:00:00:01 -et IPV4 -d 10.0.3.1 -dm 00:00:00:00:02:04 -vid None This verbosity level prints all the flows and groups that are met along the path: .. code-block:: console Tracing packet: [IN_PORT:3, ETH_DST:00:00:00:00:02:04, ETH_SRC:00:AA:00:00:00:01, ETH_TYPE:ipv4, VLAN_VID:None, IPV4_SRC:10.0.2.1/32, IPV4_DST:10.0.3.1/32, TCP_SRC:12345, TCP_DST:80, MPLS_BOS:true] Path [of:0000000000000204/3, of:0000000000000204/2, of:0000000000000227/1, of:0000000000000227/2, of:0000000000000205/2, of:0000000000000205/3] Device of:0000000000000204 Input from of:0000000000000204/3 Flows ADDED, bytes=733506, packets=8691, table=0, priority=0, selector=[], treatment=[transition=TABLE:10] ADDED, bytes=11110, packets=61, table=10, priority=32768, selector=[IN_PORT:3, VLAN_VID:None], treatment=[immediate=[VLAN_PUSH:vlan, VLAN_ID:20], transition=TABLE:20] ADDED, bytes=8698, packets=29, table=20, priority=32768, selector=[IN_PORT:3, ETH_DST:00:00:00:00:02:04, ETH_TYPE:ipv4, VLAN_VID:20], treatment=[transition=TABLE:30] ADDED, bytes=16612, packets=50, table=30, priority=48010, selector=[ETH_TYPE:ipv4, IPV4_DST:10.0.3.0/24], treatment=[deferred=[GROUP:0x70000010], transition=TABLE:60] ADDED, bytes=34400, packets=112, table=60, priority=0, selector=[], treatment=[immediate=[NOACTION]] Groups id=0x70000010, state=ADDED, type=SELECT, bytes=16906, packets=53, appId=org.onosproject.segmentrouting, referenceCount=3 id=0x70000010, bucket=1, bytes=490, packets=5, actions=[GROUP:0x9200000d] id=0x70000010, bucket=2, bytes=16416, packets=48, actions=[GROUP:0x9200000f] id=0x9200000d, state=ADDED, type=INDIRECT, bytes=490, packets=5, appId=org.onosproject.segmentrouting, referenceCount=0 id=0x9200000d, bucket=1, bytes=490, packets=5, actions=[VLAN_POP, MPLS_PUSH:mpls_unicast, MPLS_LABEL:205, GROUP:0x9000000c, VLAN_PUSH:vlan, VLAN_ID:4095] id=0x9000000c, state=ADDED, type=INDIRECT, bytes=490, packets=5, appId=org.onosproject.segmentrouting, referenceCount=0 id=0x9000000c, bucket=1, bytes=490, packets=5, actions=[ETH_DST:00:00:00:00:02:27, ETH_SRC:00:00:00:00:02:04, VLAN_ID:4094, GROUP:0xffe0002] id=0xffe0002, state=ADDED, type=INDIRECT, bytes=726, packets=7, appId=org.onosproject.segmentrouting, referenceCount=0 id=0xffe0002, bucket=1, bytes=726, packets=7, actions=[VLAN_POP, OUTPUT:2] id=0x9200000f, state=ADDED, type=INDIRECT, bytes=16416, packets=48, appId=org.onosproject.segmentrouting, referenceCount=0 id=0x9200000f, bucket=1, bytes=16416, packets=48, actions=[VLAN_POP, MPLS_PUSH:mpls_unicast, MPLS_LABEL:205, GROUP:0x9000000e, VLAN_PUSH:vlan, VLAN_ID:4095] id=0x9000000e, state=ADDED, type=INDIRECT, bytes=16416, packets=48, appId=org.onosproject.segmentrouting, referenceCount=0 id=0x9000000e, bucket=1, bytes=16416, packets=48, actions=[ETH_DST:00:00:00:00:02:26, ETH_SRC:00:00:00:00:02:04, VLAN_ID:4094, GROUP:0xffe0001] id=0xffe0001, state=ADDED, type=INDIRECT, bytes=16416, packets=48, appId=org.onosproject.segmentrouting, referenceCount=0 id=0xffe0001, bucket=1, bytes=16416, packets=48, actions=[VLAN_POP, OUTPUT:1] Output through of:0000000000000204/2 Device of:0000000000000227 Input from of:0000000000000227/1 Flows ADDED, bytes=702318, packets=8511, table=0, priority=0, selector=[], treatment=[transition=TABLE:10] ADDED, bytes=343130, packets=4234, table=10, priority=32768, selector=[IN_PORT:1, VLAN_VID:None], treatment=[immediate=[VLAN_PUSH:vlan, VLAN_ID:4094], transition=TABLE:20] ADDED, bytes=754, packets=7, table=20, priority=32768, selector=[IN_PORT:1, ETH_DST:00:00:00:00:02:27, ETH_TYPE:mpls_unicast, VLAN_VID:4094], treatment=[transition=TABLE:23] ADDED, bytes=17566, packets=57, table=23, priority=0, selector=[], treatment=[transition=TABLE:24] ADDED, bytes=510, packets=5, table=24, priority=100, selector=[ETH_TYPE:mpls_unicast, MPLS_LABEL:205, MPLS_BOS:true], treatment=[deferred=[MPLS_POP:ipv4, DEC_TTL, GROUP:0x70000017], transition=TABLE:60] ADDED, bytes=17566, packets=57, table=60, priority=0, selector=[], treatment=[immediate=[NOACTION]] Groups id=0x70000017, state=ADDED, type=SELECT, bytes=754, packets=7, appId=org.onosproject.segmentrouting, referenceCount=2 id=0x70000017, bucket=1, bytes=754, packets=7, actions=[GROUP:0x20000016] id=0x20000016, state=ADDED, type=INDIRECT, bytes=754, packets=7, appId=org.onosproject.segmentrouting, referenceCount=0 id=0x20000016, bucket=1, bytes=754, packets=7, actions=[ETH_DST:00:00:00:00:02:05, ETH_SRC:00:00:00:00:02:27, VLAN_ID:4094, GROUP:0xffe0002] id=0xffe0002, state=ADDED, type=INDIRECT, bytes=754, packets=7, appId=org.onosproject.segmentrouting, referenceCount=0 id=0xffe0002, bucket=1, bytes=754, packets=7, actions=[VLAN_POP, OUTPUT:2] Output through of:0000000000000227/2 Device of:0000000000000205 Input from of:0000000000000205/2 Flows ADDED, bytes=2105886, packets=24084, table=0, priority=0, selector=[], treatment=[transition=TABLE:10] ADDED, bytes=358792, packets=4275, table=10, priority=32768, selector=[IN_PORT:1, VLAN_VID:None], treatment=[immediate=[VLAN_PUSH:vlan, VLAN_ID:4094], transition=TABLE:20] ADDED, bytes=16416, packets=48, table=20, priority=32768, selector=[IN_PORT:1, ETH_DST:00:00:00:00:02:05, ETH_TYPE:ipv4, VLAN_VID:4094], treatment=[transition=TABLE:30] ADDED, bytes=196, packets=2, table=30, priority=64010, selector=[ETH_TYPE:ipv4, IPV4_DST:10.0.3.1/32], treatment=[deferred=[GROUP:0x2000002a], transition=TABLE:60] ADDED, bytes=1370884, packets=15163, table=60, priority=0, selector=[], treatment=[immediate=[NOACTION]] Groups id=0x2000002a, state=ADDED, type=INDIRECT, bytes=196, packets=2, appId=org.onosproject.segmentrouting, referenceCount=1 id=0x2000002a, bucket=1, bytes=196, packets=2, actions=[ETH_DST:00:AA:00:00:00:03, ETH_SRC:00:00:00:00:02:05, VLAN_ID:30, GROUP:0x1e0003] id=0x1e0003, state=ADDED, type=INDIRECT, bytes=12960, packets=126, appId=org.onosproject.segmentrouting, referenceCount=1 id=0x1e0003, bucket=1, bytes=12960, packets=126, actions=[VLAN_POP, OUTPUT:3] id=0x2000002a, state=ADDED, type=INDIRECT, bytes=196, packets=2, appId=org.onosproject.segmentrouting, referenceCount=1 id=0x2000002a, bucket=1, bytes=196, packets=2, actions=[ETH_DST:00:AA:00:00:00:03, ETH_SRC:00:00:00:00:02:05, VLAN_ID:30, GROUP:0x1e0003] id=0x1e0003, state=ADDED, type=INDIRECT, bytes=12960, packets=126, appId=org.onosproject.segmentrouting, referenceCount=1 id=0x1e0003, bucket=1, bytes=12960, packets=126, actions=[VLAN_POP, OUTPUT:3] Output through of:0000000000000205/3 Path [of:0000000000000204/3, of:0000000000000204/1, of:0000000000000226/1, of:0000000000000226/2, of:0000000000000205/1, of:0000000000000205/3] Device of:0000000000000204 Input from of:0000000000000204/3 Flows ADDED, bytes=733506, packets=8691, table=0, priority=0, selector=[], treatment=[transition=TABLE:10] ADDED, bytes=11110, packets=61, table=10, priority=32768, selector=[IN_PORT:3, VLAN_VID:None], treatment=[immediate=[VLAN_PUSH:vlan, VLAN_ID:20], transition=TABLE:20] ADDED, bytes=8698, packets=29, table=20, priority=32768, selector=[IN_PORT:3, ETH_DST:00:00:00:00:02:04, ETH_TYPE:ipv4, VLAN_VID:20], treatment=[transition=TABLE:30] ADDED, bytes=16612, packets=50, table=30, priority=48010, selector=[ETH_TYPE:ipv4, IPV4_DST:10.0.3.0/24], treatment=[deferred=[GROUP:0x70000010], transition=TABLE:60] ADDED, bytes=34400, packets=112, table=60, priority=0, selector=[], treatment=[immediate=[NOACTION]] Groups id=0x70000010, state=ADDED, type=SELECT, bytes=16906, packets=53, appId=org.onosproject.segmentrouting, referenceCount=3 id=0x70000010, bucket=1, bytes=490, packets=5, actions=[GROUP:0x9200000d] id=0x70000010, bucket=2, bytes=16416, packets=48, actions=[GROUP:0x9200000f] id=0x9200000d, state=ADDED, type=INDIRECT, bytes=490, packets=5, appId=org.onosproject.segmentrouting, referenceCount=0 id=0x9200000d, bucket=1, bytes=490, packets=5, actions=[VLAN_POP, MPLS_PUSH:mpls_unicast, MPLS_LABEL:205, GROUP:0x9000000c, VLAN_PUSH:vlan, VLAN_ID:4095] id=0x9000000c, state=ADDED, type=INDIRECT, bytes=490, packets=5, appId=org.onosproject.segmentrouting, referenceCount=0 id=0x9000000c, bucket=1, bytes=490, packets=5, actions=[ETH_DST:00:00:00:00:02:27, ETH_SRC:00:00:00:00:02:04, VLAN_ID:4094, GROUP:0xffe0002] id=0xffe0002, state=ADDED, type=INDIRECT, bytes=726, packets=7, appId=org.onosproject.segmentrouting, referenceCount=0 id=0xffe0002, bucket=1, bytes=726, packets=7, actions=[VLAN_POP, OUTPUT:2] id=0x9200000f, state=ADDED, type=INDIRECT, bytes=16416, packets=48, appId=org.onosproject.segmentrouting, referenceCount=0 id=0x9200000f, bucket=1, bytes=16416, packets=48, actions=[VLAN_POP, MPLS_PUSH:mpls_unicast, MPLS_LABEL:205, GROUP:0x9000000e, VLAN_PUSH:vlan, VLAN_ID:4095] id=0x9000000e, state=ADDED, type=INDIRECT, bytes=16416, packets=48, appId=org.onosproject.segmentrouting, referenceCount=0 id=0x9000000e, bucket=1, bytes=16416, packets=48, actions=[ETH_DST:00:00:00:00:02:26, ETH_SRC:00:00:00:00:02:04, VLAN_ID:4094, GROUP:0xffe0001] id=0xffe0001, state=ADDED, type=INDIRECT, bytes=16416, packets=48, appId=org.onosproject.segmentrouting, referenceCount=0 id=0xffe0001, bucket=1, bytes=16416, packets=48, actions=[VLAN_POP, OUTPUT:1] Output through of:0000000000000204/1 Device of:0000000000000226 Input from of:0000000000000226/1 Flows ADDED, bytes=701910, packets=8507, table=0, priority=0, selector=[], treatment=[transition=TABLE:10] ADDED, bytes=358984, packets=4275, table=10, priority=32768, selector=[IN_PORT:1, VLAN_VID:None], treatment=[immediate=[VLAN_PUSH:vlan, VLAN_ID:4094], transition=TABLE:20] ADDED, bytes=16608, packets=48, table=20, priority=32768, selector=[IN_PORT:1, ETH_DST:00:00:00:00:02:26, ETH_TYPE:mpls_unicast, VLAN_VID:4094], treatment=[transition=TABLE:23] ADDED, bytes=17158, packets=53, table=23, priority=0, selector=[], treatment=[transition=TABLE:24] ADDED, bytes=16608, packets=48, table=24, priority=100, selector=[ETH_TYPE:mpls_unicast, MPLS_LABEL:205, MPLS_BOS:true], treatment=[deferred=[MPLS_POP:ipv4, DEC_TTL, GROUP:0x7000000b], transition=TABLE:60] ADDED, bytes=17158, packets=53, table=60, priority=0, selector=[], treatment=[immediate=[NOACTION]] Groups id=0x7000000b, state=ADDED, type=SELECT, bytes=16608, packets=48, appId=org.onosproject.segmentrouting, referenceCount=2 id=0x7000000b, bucket=1, bytes=16608, packets=48, actions=[GROUP:0x20000009] id=0x20000009, state=ADDED, type=INDIRECT, bytes=16608, packets=48, appId=org.onosproject.segmentrouting, referenceCount=0 id=0x20000009, bucket=1, bytes=16608, packets=48, actions=[ETH_DST:00:00:00:00:02:05, ETH_SRC:00:00:00:00:02:26, VLAN_ID:4094, GROUP:0xffe0002] id=0xffe0002, state=ADDED, type=INDIRECT, bytes=16608, packets=48, appId=org.onosproject.segmentrouting, referenceCount=0 id=0xffe0002, bucket=1, bytes=16608, packets=48, actions=[VLAN_POP, OUTPUT:2] Output through of:0000000000000226/2 Device of:0000000000000205 Input from of:0000000000000205/1 Flows ADDED, bytes=2105886, packets=24084, table=0, priority=0, selector=[], treatment=[transition=TABLE:10] ADDED, bytes=358792, packets=4275, table=10, priority=32768, selector=[IN_PORT:1, VLAN_VID:None], treatment=[immediate=[VLAN_PUSH:vlan, VLAN_ID:4094], transition=TABLE:20] ADDED, bytes=16416, packets=48, table=20, priority=32768, selector=[IN_PORT:1, ETH_DST:00:00:00:00:02:05, ETH_TYPE:ipv4, VLAN_VID:4094], treatment=[transition=TABLE:30] ADDED, bytes=196, packets=2, table=30, priority=64010, selector=[ETH_TYPE:ipv4, IPV4_DST:10.0.3.1/32], treatment=[deferred=[GROUP:0x2000002a], transition=TABLE:60] ADDED, bytes=1370884, packets=15163, table=60, priority=0, selector=[], treatment=[immediate=[NOACTION]] Groups id=0x2000002a, state=ADDED, type=INDIRECT, bytes=196, packets=2, appId=org.onosproject.segmentrouting, referenceCount=1 id=0x2000002a, bucket=1, bytes=196, packets=2, actions=[ETH_DST:00:AA:00:00:00:03, ETH_SRC:00:00:00:00:02:05, VLAN_ID:30, GROUP:0x1e0003] id=0x1e0003, state=ADDED, type=INDIRECT, bytes=12960, packets=126, appId=org.onosproject.segmentrouting, referenceCount=1 id=0x1e0003, bucket=1, bytes=12960, packets=126, actions=[VLAN_POP, OUTPUT:3] id=0x2000002a, state=ADDED, type=INDIRECT, bytes=196, packets=2, appId=org.onosproject.segmentrouting, referenceCount=1 id=0x2000002a, bucket=1, bytes=196, packets=2, actions=[ETH_DST:00:AA:00:00:00:03, ETH_SRC:00:00:00:00:02:05, VLAN_ID:30, GROUP:0x1e0003] id=0x1e0003, state=ADDED, type=INDIRECT, bytes=12960, packets=126, appId=org.onosproject.segmentrouting, referenceCount=1 id=0x1e0003, bucket=1, bytes=12960, packets=126, actions=[VLAN_POP, OUTPUT:3] Output through of:0000000000000205/3 Result: Reached required destination Host Reached required destination Host Successful Example ------------------ In this example we trace a packet that should be bridged between two hosts in the same subnet .. code-block:: console onos> t3-troubleshoot -s 10.0.2.1 -sp of:0000000000000204/3 -sm 00:AA:00:00:00:01 -et IPV4 -d 10.0.3.1 -dm 00:AA:00:00:00:02 -vid None Tracing packet: [IN_PORT:3, ETH_DST:00:AA:00:00:00:02, ETH_SRC:00:AA:00:00:00:01, ETH_TYPE:ipv4, VLAN_VID:None, IPV4_SRC:10.0.2.1/32, IPV4_DST:10.0.2.2/32, TCP_SRC:12345, TCP_DST:80, MPLS_BOS:true] Paths [of:0000000000000204/3, of:0000000000000204/4] Result: Reached required destination Host Failed Example -------------- Obviously failures can happen along one of the paths that the packet can take. In our sample we removed a flow in ``of:0000000000000226`` thus disabling that possible path for our initial packet. The output of our trace would then look something like: .. code-block:: console onos> t3-troubleshoot -s 10.0.2.1 -sp of:0000000000000204/3 -sm 00:AA:00:00:00:01 -et IPV4 -d 10.0.3.1 -dm 00:00:00:00:02:04 -vid None Tracing packet: [IN_PORT:3, ETH_DST:00:00:00:00:02:04, ETH_SRC:00:AA:00:00:00:01, ETH_TYPE:ipv4, VLAN_VID:None, IPV4_SRC:10.0.2.1/32, IPV4_DST:10.0.3.1/32, TCP_SRC:12345, TCP_DST:80, MPLS_BOS:true] Paths [of:0000000000000204/3, of:0000000000000204/2, of:0000000000000227/1, of:0000000000000227/2, of:0000000000000205/2, of:0000000000000205/3] [of:0000000000000204/3, of:0000000000000204/1, of:0000000000000226/1] Result: Reached required destination Host No output out of device of:0000000000000226 Packet is dropped Notice that on the second path that was previously going through ``of:0000000000000226`` now the packet is dropped due to the rule we removed. Example of Various Packet Types ------------------------------- These sample commands refer to the Mininet environment found in trellis.py [#trellis.py]_ - L2 Unicast IPv4 .. code-block:: console t3-troubleshoot -s 10.0.2.1 -sp of:0000000000000204/3 -sm 00:AA:00:00:00:01 -d 10.0.2.2 -dm 00:AA:00:00:00:02 - L2 Unicast IPv6 .. code-block:: console t3-troubleshoot -vv -s 2000::301 -sp of:0000000000000205/5 -sm 00:BB:00:00:00:03 -d 2000::302 -dm 00:BB:00:00:00:04 -et ipv6 - L3 Unicast IPv4 .. code-block:: console t3-troubleshoot -s 10.0.2.1 -sp of:0000000000000204/3 -sm 00:AA:00:00:00:01 -d 10.0.3.1 -dm 00:00:00:00:02:04 - L3 Unicast IPv6 .. code-block:: console t3-troubleshoot -vv -s 2000::301 -sp of:0000000000000205/5 -sm 00:BB:00:00:00:03 -d 2000::202 -dm 00:00:00:00:02:05 -et ipv6 - ARP .. code-block:: console t3-troubleshoot -sp of:0000000000000204/3 -et ARP - DHCP .. code-block:: console t3-troubleshoot -vv -s 10.0.2.1 -sp of:0000000000000204/3 -sm 00:AA:00:00:00:01 -d 10.0.3.253 -dm 00:00:00:00:02:04 -ipp 17 -udps 67 -udpd 67 - LLDP .. code-block:: console t3-troubleshoot -sp of:0000000000000204/3 -et lldp - BDDP .. code-block:: console t3-troubleshoot -sp of:0000000000000204/3 -et bddp - LLDP from CONTROLLER T3 is also capable of tracing packets coming in from the CONTROLLER. We use the same input port with the possibility to give CONTROLLER as logical port number. This is a mere convenience to carry the information inside T3 and do the proper flooding to all the ports of the given device. This case is not treated like all the rest and the input port here is a logical entity that has no match on any physical element on the device. .. code-block:: console t3-troubleshoot -sp of:0000000000000204/CONTROLLER -et lldp - Multicast T3 is also capable of tracing multicast packets. .. code-block:: console t3-troubleshoot -vv -sp of:0000000000000205/9 -et ipv4 -d 224.0.0.1 -dm 01:00:5e:00:00:01 t3-troubleshoot-simple ====================== T3 also offers a simplified version of the command to be able to ping between two given hosts without having to specify all the information. This commands bases itself on top of some configuration present in ONOS through netcfg, namely the VLAN interface configuration and the segment routing leaf router MAC for L3 Unicast. If that is not present the user needs to input this information manually recurring to the the previously shown command. Same verbosity levels and output as the troubleshoot command are possible. t3-troubleshoot-simple Help --------------------------- .. code-block:: console onos> t3-troubleshoot-simple --help DESCRIPTION onos:troubleshoot-simple Given two hosts troubleshoots flows and groups between them, in case of segment routing SYNTAX onos:troubleshoot-simple [options] one two ARGUMENTS one One host ID two Another host ID OPTIONS -vv, --veryverbose Outputs flows and groups for every device -j, --json Output JSON --help Display this help message -et, --ethType ETH Type (defaults to ipv4) -v, --verbose Outputs complete path t3-troubleshoot-simple Example ------------------------------ Examples are given for the same trellis.py [#trellis.py]_ script. - L2 Unicast Hosts are under the same leaf, only interface configuration is needed. .. code-block:: console t3-troubleshoot-simple -v -et IPV4 00:AA:00:00:00:01/None 00:AA:00:00:00:02/None - L3 Multicast Hosts are under different leafs, also segment routing configuration config is needed for the leaf's routerMac. .. code-block:: console t3-troubleshoot-simple -et IPV4 00:AA:00:00:00:01/None 00:AA:00:00:00:03/None t3-troubleshoot-pingall ======================= T3 also offers a ping-all command to be able to test ping between any given hosts of an EthType. This commands bases itself on top of the simplified Host to Host command. It has two verbosity levels, one just with Host and Destination with the result message of the Trace and one that shows also the packet and the paths. t3-troubleshoot-pingall Help ---------------------------- .. code-block:: console onos> t3-troubleshoot-pingall --help DESCRIPTION onos:t3-troubleshoot-pingall Traces a ping between all hosts in the system of a given ETH type SYNTAX onos:t3-troubleshoot-pingall [options] OPTIONS -j, --json Output JSON --help Display this help message -et, --ethType ETH Type (defaults to ipv4) -v, --verbose Outputs trace for each host to host combination t3-troubleshoot-pingall Examples -------------------------------- - IPv4 hosts .. code-block:: console t3-troubleshoot-pingall - IPv6 hosts .. code-block:: console t3-troubleshoot-pingall -et IPV6 t3-troubleshoot-mcast ===================== T3 also offers a mcast command queries the system for all the multicast routes given a certain vlanId. It prints all the traces given a certain group, source and source connect point. It has two "standard" verbosity levels. t3-troubleshoot-mcast Help -------------------------- .. code-block:: console onos> t3-troubleshoot-mcast --help DESCRIPTION onos:t3-troubleshoot-mcast Traces all the mcast routes present in the system SYNTAX onos:t3-troubleshoot-mcast [options] OPTIONS -j, --json Output JSON --help Display this help message -vv, --veryverbose Outputs details of every trace -vid, --vlanId Vlan of incoming packet (defaults to None) -v, --verbose Outputs trace for each host to host combination REST API ======== T3 now also offers a way to execute the troubleshoot through REST API endpoints. You can find the description and test the API at the ONOS docs endpoint here: .. code-block:: text :8181/onos/v1/docs/#/t3 The rest API offered are a non verbose and a verbose version of the troubleshoot simple command. It bases itself on top of some configuration present in ONOS through netcfg, namely the VLAN interface configuration and the segment routing leaf router MAC for L3 Unicast. The use need to specify just the Source Host, the destination host and the ETH type. .. code-block:: console curl -X GET --header 'Accept: application/json' 'http://localhost:8181/onos/v1/t3/t3/simple///' .. code-block:: console curl -X GET --header 'Accept: application/json' 'http://localhost:8181/onos/v1/t3/t3/simple////verbose Last Resort =========== In the case where you can't figure out what is going wrong even with help of T3, you can seek help on Trellis developer mailing list ``trellis-dev@opennetworking.org``. There are a few things we would like you to attach: - **Issue description** - **Environment description**, such as ONOS version, switch model and OF-DPA version - **Steps of reproduction**, as detail as possible - **Diagnostics**. We have built a tool ``onos-diagnostics`` (see `ONOS Remote Admin Tools `_) to help you easily collect and package ONOS diagnostics Reference ========= .. [#trellis.py] ``_